Fast onsite LaserJet 9050/9050n printer repair maintenance service and LaserJet 9050 repair Los Angeles, Orange County, Riverside Inland Empire.

We repair LaserJet 9050 printers with grinding noise, maintenance service error codes and print defects !

We specialize on HP LaserJet 9050/9050n printer repair and onsite service in Los Angeles and Orange County cities with image defects, vertical lines, horizontal lines, dots, smears and maintenance service errors. Fast onsite Laser Jet 9050 printer maintenance service error code repairs in Southern California. Our technicians have the knowledge and technical ability to repair LaserJet 9050/9050n printer problems on the first visit.

We offer 6 months warranty on all LaserJet 9050/9050n printer repair service in Southern California. We carry most common HP laserjet 9050 printer parts to fix hardware failures with numerical error code on the first visit. We sell genuine HP 43X toner cartridges to be used in LaserJet 9000, 9040 and 9050 printers. We also sell fully refurbished Laser-Jet 9050 printers with 1 year warranty on parts and labor.

We carry original 9050 toners and maintenance kits to solve image defects with vertical lines, Horizontal lines, smeared prints, toner not bonding to the paper, dirty printing, image defects and grinding noise from the fuser unit. Our onsite printer technicians carry original LaserJet 9050 fuser unit, Maintenance Kit, Roller Kits, paper cassette trays, Registration Assembly, cartridge drive, paper pickup assembly, 9050 duplex unit and formatter boards to serve you faster.

Is your LaserJet 9000, 9040 and 9050 printer failing with MAINTENANCE SERVICE error code?

We replace 9000/9040/9050 Maintenance Kit and reset the maintenance error with 6 months warranty!

1. Turn the product off.
2. Turn the printer back on and wait for the memory count, when the printer starts counting memory press the checkmark (Select) button.
3. Continue to hold down the checkmark button until all of the control panel LEDs are illuminated, then release the checkmark button.
4. When the checkmark button is released, "Select Language" will appear on the control panel.
5. Use the Up Arrow to scroll to NEW MAINTENANCE KIT.
6. Press the checkmark button.

Los Angeles and Orange County LaserJet 9050 printer repair and service.

We provide HP LaserJet 9050 series printer maintenance service and repairs!

Hewlett Packard LaserJet 9050 printer specifications

We specialize on HP 9050 repair with numerical error code failures and paper jams in Southern California!

Our HP LaserJet 9050 field service technicians will resolve ALL service error Codes

• LaserJet 9050 13.01.00 a page is jammed in the paper path at the tray 1 feed area. HP 9050 13.01.00 A page is jammed in the paper path at tray X feed area.

• Tray 2: The media did not reach the tray 2 feed sensor (PS1402) within the specified time. Tray 3: The media did not reach the tray 3 feed sensor (PS1404) within the specified time.  

• HP 9050 13.03.00 a page is jammed in the paper path at the tray 1 feed area. The media did not reach the registration sensor (PS2) within the specified time. LaserJet 9000 13.03.00 a page is jammed in the paper path at tray X feed area. The media did not reach the registration sensor (PS2) within the specified time. LaserJet 9050 13.03.00 a page is jammed in the paper path at the feed area.

• LaserJet 9050 13.05.00 a page is jammed in the paper path at the fuser area . The leading edge of the media did not reach the fuser delivery sensor (PS502) within the specified time.

• LaserJet 9050 13.05.00 JAM INSIDE RIGHT DOOR
  13.05.00 a page is jammed in the paper path at the fuser area. The leading edge of the media did not reach the fuser delivery sensor (PS502) within the specified time.

• LaserJet 9050 13.06.00 JAM INSIDE FRONT DOOR
  13.06.00 a page is jammed in the paper path at the fuser area.

• 9050 13.06.00 JAM INSIDE LEFT DOOR
  13.06.00 a page is jammed in the paper path at the fuser area.

• Hewlett Packard 9050 13.09.00 JAM INSIDE LEFT DOOR 13.09.00 a page is jammed in the paper path at the face-down bin. The leading edge of the media did not reach the face-down bin delivery sensor (PS1451) within the specified time.

• Laser-Jet 9050 13.0A.00 JAM INSIDE LEFT DOOR 13.0A.00 a page is jammed in the paper path. Access through the left
  door. The trailing edge of the media did not leave the face-down bin delivery sensor (PS1451) within the specified time.

• Laser Jet 9050 13.0A.00 JAM IN TOP OUTPUT BIN 13.0A.00 a page is jammed in the paper path at the face-down bin.
  The trailing edge of the media did not leave the face-down bin delivery sensor (PS1451) within the specified time.

• 13.10.00 JAM INSIDE LEFT DOOR 13.10.00 a page is jammed in the paper path at the reversing area.
  The leading edge of the media did not reach the reversed paper sensor (PS2002) in the duplexer within the specified
  time.

• 13.11.00 JAM INSIDE LEFT DOOR 13.11.00 a page is jammed in the paper path at the reversing area.
  The trailing edge of the media did not leave the reversed paper sensor (PS2002) in the duplexer within the specified
  timing.

• 13.11.05 JAM IN INPUT ACCESSORY 13.11.05 a page is jammed in the paper path at the registration area.
  A pickup delay jam has occurred.

• 13.11.06 PICKUP STATIONARY JAM 13.11.06 A page is jammed in the pickup area of the input accessory.

• 13.11.07 JAM IN INPUT ACCESSORY 13.11.07 a page is jammed in the right door area.
  A page stopped in the registration area.

• 13.11.08 JAM IN INPUT ACCESSORY
  13.11.08 a page is jammed in the paper path at the vertical transfer unit registration area. A paper-delivery delay jam occurred.

• 13.11.09 JAM IN INPUT ACCESSORY
  13.11.09 a page is jammed in the paper path at the right door area. A paper-delivery stationary jam occurred.

• 13.11.10 RESIDUAL JAM IN DELIVERY AREA
  13.11.10 a page is jammed in the delivery area when the power is turned on or when the front door is closed.

• 13.11.0A JAM IN INPUT DEVICE
  13.11.0A a page is jammed in the input device when the power is turned on.

• 13.12.00 JAM INSIDE DUPLEXER DOOR
  13.12.00 a page is jammed in the paper path at the duplexer. The leading edge of the media did not reach the duplexer paper sensor (PS2004) within the specified time.

• 13.12.00 JAM INSIDE LEFT DOOR
  13.12.00 a page is jammed in the paper path at the duplexer. The leading edge of the media did not reach the duplexer paper sensor (PS2004) within the specified time.

• 13.12.01 JAM IN LEFT ACCESSORY
  13.12.01 Media is present in the flipper when power is turned on. An auto-flush operation is not possible.

• 13.12.02 JAM IN LEFT ACCESSORY
  13.12.02 Media never reached the flipper input area.

• 13.12.03 JAM IN LEFT ACCESSORY
  13.12.03 Media is jammed in the flipper entry area.

• 13.12.04 JAM IN LEFT ACCESSORY
  13.12.04 Media is jammed in the flipper internal area.

• 13.12.10 JAM IN LEFT ACCESSORY
  13.12.0A Media was present in the paper path when power was turned on.

• 13.12.11 JAM IN LEFT ACCESSORY
  13.12.0B Media stopped while it was flipping. Media never reached the FLAG EXIT sensor.

• 13.12.12 JAM IN LEFT ACCESSORY
  13.12.0C Media stopped in the paper path.

• 13.12.13 JAM IN LEFT ACCESSORY
  13.12.0D Media stopped in the paper path. Media jammed entering the accumulator or offset module.

• 13.12.14 Media is present in the accumulator when the printer is turned on. Media is activating the exit sensor when the printer is turned on.

• 13.12.20 JAM IN LEFT ACCESSORY

• 13.12.21 JAM IN LEFT ACCESSORY

• 13.12.22 JAM IN LEFT ACCESSORY
  13.12.16 The GW sensor never activated. Note - This jam might be a hardware malfunction if the failure persists consistently.

• 13.12.23 JAM IN LEFT ACCESSORY
  13.12.17 Media is jammed in the accumulator exit area.

• 13.12.24 JAM IN LEFT ACCESSORY
  13.12.18 the retainer sensor does not activate. Note - This jam might be a hardware malfunction if the error persists.

• 13.12.30 JAM IN LEFT ACCESSORY
  13.12.1E the carriage hit the media. Media is jammed between the carriage and the stack of paper in the stapling area. The carriage motor does not detect movement; it should be finding the home position.

• 13.12.31 JAM IN LEFT ACCESSORY
  13.12.1F Media is jammed in the stapler unit.

• 13.12.40 JAM IN LEFT ACCESSORY
  13.12.28 Media is present in the offset module when power is turned on.

• 13.12.41 JAM IN LEFT ACCESSORY
  13.12.29 the offset module did not reach its target position. Note - This jam might be a hardware malfunction if the failure repeats five consecutive times.

• 13.12.42 JAM IN LEFT ACCESSORY
  13.12.2 a Media is jammed in the offset module exit area.

• 13.13.00 JAM INSIDE LEFT DOOR
  13.13.00 a page is jammed in the paper path at the duplexer.
  The trailing edge of the media did not leave the duplexer paper sensor (PS2004) within a specified time.

• 13.20.00 JAM INSIDE FRONT DOOR
  13.20.00 a page is jammed in the paper path. Media is present in the printer. Note - Media is detected in the paper path when the printer is turned on, or media is detected after opening and closing any door:
  Registration sensor (PS2)
  Fusing-unit jam sensor (PS501)
  Fusing-unit delivery sensor (PS502)
  Tray 2 paper-feed sensor (PS1402)
  Tray 3 paper-feed sensor (PS1403)
  Face-down-bin delivery sensor (PS1451)
  The duplexer residual paper sensor (PS2005) detects media.

• 13.20.00 JAM INSIDE LEFT DOOR
  13.20.00 a page is jammed in the paper path. Media is present in the printer.

• 13.21.00 JAM INSIDE LEFT DOOR
  13.21.00 a door is open.

• 13.30.00 JAM IN TRAY X
  13.30.00 a page is jammed in the pickup area of tray X.

• 13.30.00 JAM INSIDE RIGHT DOOR
  13.30.00 a page is jammed in the pickup area of tray 1.

• 13.31.00 JAM INSIDE LEFT DOOR
  13.31.00 a page is jammed in the paper path at the fuser area.
  The leading edge of the media reached the fuser delivery sensor (PS502) within the specified time, but the trailing edge of the media did not reach the fuser-jam sensor (PS501) within the specified time.

• 13.32.00 JAM INSIDE RIGHT DOOR
  13.32.00 a page is jammed in the paper path at the feed area.
  The media did not leave the registration sensor (PS2) within the specified time.
• 13.XX.YZ JAM INSIDE TOP OUTPUT BIN
  13.0A.00 a delivery stay jam has occurred, and the media did not clear PS1451 within the specified time.

• 13.XX.YZ JAM IN TRAY N
  13.01.00 or 13.01.00 or 13.30.00
  A tray 2 pickup jam has occurred (N = 2) (PS1402).
  A tray 3 pickup jam has occurred (N = 3) (PS1404).
  A tray 1 pickup jam has occurred (N = 1).

• 13.XX.YZ JAM INSIDE FRONT DOOR
  13.05.00 or 13.31.00
  A fuser delivery delay jam has occurred, and the media did not clear PS501 within the specified time.
  A fuser delivery delay jam has occurred, and the media did not clear PS502 within the specified time.

• 13.XX.YZ JAM INSIDE LEFT DOOR
  13.06.00 a fuser delivery stay jam has occurred, and the media did not clear PS501 within the specified time.

• 13.XX.YZ JAM INSIDE LEFT DOOR
  13.09.00 a delivery delay jam has occurred, and the media did not clear PS1451 within the specified time.

• 13.XX.YZ JAM INSIDE LEFT DOOR
  13.10.00 or 13.11.00
  A reversing delay jam has occurred.
  A reversing stay jam has occurred.

• 13.XX.YZ JAM INSIDE DUPLEXER
  13.12.00 or 13.13.00
  A duplexing delay jam has occurred.
  A duplexer stay jam has occurre

• 13.XX.YZ JAM INSIDE RIGHT DOOR
  13.32.00 a media stay jam has occurred in the paper path.
• 21 PAGE TOO COMPLEX

• 22 The printer EIO card in slot X overflowed the I/O buffer during a busy state.

• 40 BAD SERIAL TRANSMISSIONS
  40 A serial data error (parity, framing, or line overrun) occurred while data was being received.

• 40 EIO X BAD TRANSMISSION
  40 A connection with the EIO card in slot X has been abnormally interrupted.
• 41.3 UNEXPECTED SIZE TRAY XX
  41.3 Tray XX is loaded with media that is longer or shorter in the feed direction than the size that is configured for the tray.

• 41.5 UNEXPECTED TYPE TRAY XX
  41.5 Tray XX is loaded with a media type (transparencies, envelopes) that is different from what the tray is configured to use.

  41.X A printer error occurred, and X corresponds to the following issue:
  41.1 = Unknown misprint error
  41.2 = Beam detect error
  41.4 = No video sync
  Reseat connections to the laser/scanner and DC controller.

• 49.X A critical firmware error occurred.  Update the firmware to the latest version.

• 50.X A fuser error occurred, and X corresponds to the following issue:
  50.1 Low fuser temperature
  50.2 Fuser warm up service
  50.3 High fuser temperature
  50.4 Faulty fuser
  50.5 Inconsistent fuser
  50.6 Faulty fuser

• 51.X A printer error occurred, and X corresponds to the following issue:
  51.1 Beam detect error
  51.2 Laser error

• 52.X A printer error occurred, and X corresponds to the following issue:
  52.0 Scanner error
  52.1 Scanner startup error
  52.2 Scanner rotation error

• 53.XY.ZZ A DIMM error occurred, and X, Y and Z corresponds to the following issues:
  X = DIMM type
  53.0 ROM
  53.1 RAM
  Y = Device location
  53.00 On board RAM/ROM
  53.01 DIMM slot 1
  53.02 DIMM slot 2
  53.03 DIMM slot 3
  4 DIMM slots 4
  ZZ = Error number
  53.00.01 Unsupported memory
  53.01.02 Recognized memory
  53.03.03 Less than minimum memory
  53.04.04 Exceeds maximum memory slot.

• 56.X A printer error occurred, and X corresponds to the following issue:
  56.1 Illegal input selection
  56.2 Duplexer was removed while power is on

• Error 57.X A printer error occurred, and X corresponds to the following issue:
  57.1 Cartridge fan error(fan #5)
  57.2 (not used)
  57.3 Power-supply-fan error (fan #1)
  57.4 Formatter- (controller-) fan error (fan #2)
  57.5 Delivery-fan (front) error (fan #4)
  57.6 Face-down tray error
  57.7 Delivery-fan (back) error (fan #3)
  57.8 Duplexer-fan error

• 58.X A printer error occurred.
  XX = 04 (power supply)
  XX = 03 (CPU)

• 59.X A printer error occurred, and X corresponds to the following issue:
  59.0 Main motor error
  59.1 Main motor startup error
  59.2 Main motor rotation error

• Error 59.X A printer error occurred, and X corresponds to the following issue:
  59.3 Abnormal fuser motor start
  59.4 Fuser motor rotation error

• Error code 60.X Tray X is lifting the media to the top of the tray for correct feeding, but something is preventing the lift process.
  60.2 Error in tray 2
  60.3 Error in tray 3

• Error code 62.X A printer error occurred, and X corresponds to the following issue:
  62.1 memory in DIMM slot 1
  62.2 memory in DIMM slot 2
  62.3 memory in DIMM slot 3
  62.4 memory in DIMM slot 4

• 64 A scan buffer error occurred. 1 Turn off the printer, and then turn the printer on to continue.

• 66.11.00 a failure in an external input device occurred . A lifting operation is not completed in the correct amount of time.

• 66.11.01 the paper path connection unit is not installed . Install the paper-path connection unit.

• 66.12.20 OUTPUT DEVICE FAILURE

• 66.12.14 the retainer sensor was not activated. The retainer DC motor, located in the accumulator, is damaged. The printer cannot finish a power-on sequence.

• 66.12.21 The bearing bracket is damaged.
  The accumulator-wheel sensor is damaged. The printer cannot finish a power-on sequence.

• 66.12.40 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER

• 66.12.28 the offset module did not reach the offset position. The printer firmware detected five consecutive jams.

• 66.12.60 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER

• 66.12.3C An EEPROM error occurred . The EEPROM on the controller PCA is damaged.

• 66.12.70 OUTPUT DEVICE FAILURE CHECK CABLES AND CYCLE POWER

• 66.12.46 An EEPROM error occurred. The EEPROM on the controller PCA is damaged. Replace the output device controller PCA.

• 68.X The printer NVRAM or hard disk is failing to write . Printing can continue but there might be unexpected
  response because an error occurred in permanent storage.

• 68.0 one or more of the printer settings that were saved in the NVRAM or hard disk is invalid and is reset to the factory default. Printing can continue, but unexpected responses might occur because an error occurred in permanent storage.

• 68.1 PERMANENT STORAGE FULL
  68.1The printer NVRAM or hard disk is full . Printing can continue, but unexpected responses might occur because an error occurred in permanent storage.

• 69.X A printer error occurred where X is detailed below.
  69.0 The duplex mechanism failed
  69.1 The duplex side-adjust failed

• 79.XXXX A critical hardware error occurred.

• 80.XXXX The EIO accessory card in slot X encountered a critical error.

• 80.XXX EMBEDDED JETDIRECT ERROR
  80 An embedded Jet direct error occurred.

• 81 A temporary error occurred while testing the printer.

• 99 A firmware flash-failure occurred. Resend the flash upgrade. Replace the flash DIMM.

LaserJet 9050 parts for fast onsite service and repair in Los Angeles and Orange County!

LaserJet 9050 printer repair and 9050n service Southern California by Zip Codes!

LaserJet 9000, 9040, 9050 refurbished printer sale with 1 year warranty on parts & labor!

Same-day onsite LaserJet 9000/9040/9050 service error code repairs in Los Angeles, Orange County and Riverside County.

We provide fast onsite LaserJet 9000 repair, HP 9040 service and Laser-Jet 9050 maintenance service. Our onsite LaserJet repair team is highly trained to provide LaserJet 9000 repairs in Southern California!

All rights Reserved Laser Printer Services ©1991-2020
The Laser Printer Services Logo, this website and its contents, are property of Laser Printer Services. All images and logos used with permission from the respective owners. No part of this site, or its source code, may be reproduced in any way.