LaserJet, hp, repair, maintenance, service, laser jet
hp 8100 laser printer/laserjet 8100 repair/service, 8100 printer repair, LaserJet 8100 repairs, HP 8100 printer repair
LaserJet service, Laser Printer Repair, hp printer repairs, printer service
LaserJet repair, laser printer repairs, HP printer service, printer repairs,
laser printer, laser copier, color laser
HP LaserJet 8100 printer repair, 8100 printer Service, HP Laser Jet 8100, HP laser-jet 8100 printer service,
HP LaserJet 8100 printer onsite service in Southern California!
Los Angeles County
  • Los Angeles
  • La County
  • LA, Downtown L.A
  • Greater Los Angeles
  • West L.A
  • West Los Angeles
  • Beverly Hills
  • Culver City
  • La Downtown
  • Brentwood
  • Century City
  • Marina del Rey
  • Highland Park
  • Lincoln Heights
  • Pacific Palisades
  • Westchester
  • Westwood
  • East Los Angeles
  • Echo Park
  • Hollywood
  • L.A
  • Los Angeles
  • Mar Vista
  • Playa Del Rey
  • Playa Vista
  • Santa Monica
  • Studio City
  • Venice
  • Vernon
  • West Hollywood
  • Artesia
  • Cerritos
  • Norwalk
  • Carson
  • Compton
  • Downey
  • Hawaiian Gardens
  • Palos Verdes
  • El Segundo
  • Hermosa Beach
  • Hawthorne
  • Manhattan Beach
  • Inglewood
  • Lakewood
  • Lawndale
  • Long Beach
  • Signal Hill
  • Lynwood
  • Paramount
  • San Pedro
  • Bell
  • Bellflower
  • Maywood
  • Torrance
  • Wilmington
  • Montebello
  • Monterey Park
  • City of industry
  • City of Commerce
  • Santa Fe Springs
  • Pico Rivera
  • Rosemead
  • Hacienda Heights
  • La Habra Heights
  • La Mirada
  • La Puente
  • Rowland Heights
  • South Gate
  • Walnut
  • West Covina
  • City of Azusa
  • Pomona
  • Whittier
  • Altadena
  • Arcadia
  • Duarte
  • Monrovia
  • City of Azusa
  • Baldwin Park
  • Covina
  • Diamond Bar
  • Glendora
  • Irwindale
  • El Monte
  • El Monte
  • South El Monte, Alhambra
  • Pasadena
  • San Gabriel
  • San Marino
  • Sierra Madre
  • Burbank
  • Glendale
  • Montrose
  • La Canada Flintridge
  • La Crescenta
  • Eagle Rock
  • South Pasadena
HP laser jet 8100 printer repair service Orange County
  • Orange County
  • OC
  • Costa Mesa
  • Santa Ana
  • Tustin
  • Huntington Beach
  • Irvine
  • Cypress
  • Orange
  • Placentia
  • Fountain Valley
  • Anaheim
  • Brea
  • Fullerton
  • Garden Grove
  • Buena Park
  • Seal Beach
  • Westminster
  • Yorba Linda
  • Stanton
  • Laguna Hills
  • Laguna Niguel
  • Laguna Woods
  • Lake Forest
  • Newport Coast
  • Newport Beach Ca,
  • Rancho Santa Margarita
  • San Clemente
  • San Juan Capistrano
  • Dana Point
  • Foothill Ranch
  • Aliso Viejo
  • Corona Del Mar,
HP 8100 printer repairs San Bernardino County
  • Inland Empire
  • Claremont
  • La Verne
  • Ontario, Corona
  • Riverside
  • Moreno Valley
  • Rancho Cucamonga
  • Alta Loma
  • Chino
  • Chino Hills
  • Claremont
  • Colton
  • Grand terrace
  • San Bernardino
  • Norco
  • Redlands
  • Rubidoux
  • Upland
  • Yucipa
HP 8100 printer service San Fernando Valley
  • Encino
  • Granada Hills
  • Mission Hills
  • North Hills
  • North Hollywood
  • Panorama City
  • Reseda
  • Sherman Oaks
  • Sun Valley
  • Sunland
  • Van Nuys
  • San Gabriel Valley
 

 

 
 

HP LaserJet 8100/8100n printer repair, 8100 service error code repairs in Los Angeles, Orange County, Riverside and San Bernardino Ca.

Authorized HP LaserJet 8100 repair with maintenance service error and printing defects

We specialize on HP LaserJet 8100/8100n printer repair and onsite service in Los Angeles and Orange County cities with image defects, vertical lines, horizontal lines, dots, smears and maintenance service errors. Fast onsite Laser Jet 8100 printer maintenance service error code repairs in Southern California. Our Laser-Jet 8100 printer technicians have the technical ability to repair 8100/8100n printers on the first visit.

We provide LaserJet 8100, 8100n and 8100dn printer repair with 57 fan error, Error 50, 50.1, 50.2 fuser errors as well as 51.1, 51.2 and 52. Our LaserJet 8100 printer service team has the technical ability to provide Laser-Jet 8100 series printer repairs.

Every Hewlett Packard Laser Jet 8100 printer repair/service includes a free cleaning by our HP Certified technicians. We offer 8100/8100n printer repair with image not bonding on the paper, smeared prints, dirty prints, repeating images and vertical line due to a bad fuser unit failure. We offer 6 months warranty on every HP laser-jet 8100 printer repair and maintenance service at your site. Our HP 8100 repair technicians carry most common parts to fix ALL 8100 printer malfunctions with numerical error code on the first visit.

We carry Genuine LaserJet 8100 C4182X toner cartridges to solve print defects with horizontal lines, blotches, repeating dots, mirror image and vertical line due to a bad refurbished toner. We carry Genuine HP 8100 Maintenance Kit C3914A and fuser units. We stock HP 8100 paper input unit and delivery assembly to solve 13.1 and 13.2 error codes. We stock parts to provide 8100/8100n printer repair with 50 numerical service errors 50.1, 50.2, 50.3 and 50.4 with a bad fuser unit or low voltage power supply failure.


Clearing the maintenance count service message on Laser Jet 8100

Resetting the maintenance message/count on HP LaserJet 8100 /8150 printer

  • Turn the HP 8150 multifunction printer off.
  • Then press and hold the left (“-“) side of both the Item and Value keys while powering on.
  • Continue holding these keys until the display reads “ Reset Maintenance Count ” (on some printers, it will read “ Count ”), then release them.
  • Once the display goes to “Ready,” print a configuration page and check that “Pages Since Last Maintenance” has gone to zero. If not, go to step 2.

Using the Service Manu to reset the maintenance error on LaserJet 8100 printers!

  • In some cases (especially if the maintenance kit is installed prematurely – before the “Perform User Maintenance” message comes up), step 1 may not work. In these cases, you will have to go into service mode and directly manipulate the maintenance count:
  • Turn the printer off. Then press and hold Select and Cancel Job while powering on. Continue to hold these keys until all display lights are on, then release them.
  • Press and release the right side of Menu, then Select. The display will briefly show “Service Mode” and return to this after initializing.
  • Go into the Service Menu and set “Maintenance Count” to zero, one digit at a time (Value changes the underlined digit; Select sets that digit and moves to the next one – make sure to select all digits). When finished, press Go twice to exit the service mode. Caution: Do not change the “Maintenance Interval” – in particular, do not set it to zero! This can cause a permanent “49” error and necessitate replacement of the formatter board.

LaserJet 8100 Paper Jam error code repairs in Los Angeles and Orange County!

We repair LaserJet 8100 paper jam error codes in Southern California!

  • HP 8100 13.0 paper jam clear the printer detects a paper jam immediately after the printer is turned on
  • HP laser-jet 8100 printer 13.1 errors messages indicate that the paper did not leave Tray 2 or Tray 3.
  • Hewlett Packard 8100 13.2 paper jam errors indicate that the paper did not reach the sensor located under the toner.
  • Laserjet 8100 13.3 error code indicate a crumpled paper under the print cartridge or registration
  • Laser Jet 8100 13.4 error message indicate that the paper did not reach the sensor located in the fuser.
  • HP LJ 8100 13.5 error messages indicate that the paper has not reached the upper output bin.
  • HP laser 8100 13.6 error code indicate that paper has stopped on the way to the upper output bin.
  • Laser 8100 13.7 errors indicate that the paper never reached the first sensor in the duplexer.
  • 8100 printer with 13.8 error indicate that the paper made it into the duplexer, but jammed while being flipped.
  • LaserJet 8100 printer with 13.10 errors indicate that the paper has stopped over the last sensor in the duplexer.
  • Hewlett Packard 8100 printer 13.11 error messages indicate a problem exists with Tray 4.
  • HP 8100 13.12 error messages indicate there is a problem with the Multi-Bin Mailbox.

HP LaserJet 8100 printer repair in Southern California!

LaserJet 8150 maintenance service and repairs!

HP t 8100 printer

LaserJet 8100 models

HP 8100 Description

HP LaserJet 8100 C4214A The HP LaserJet 8100 printer comes standard with 16 MB RAM, wide format printing, two 500-sheet trays, and a 100-sheet multipurpose tray.
HP Laser-Jet 8100n C4215A The HP LaserJet 8100n printer comes standard with 16 MB RAM, wide format printing, two 500-sheet trays, a 100-sheet multipurpose tray, and an HP Jet direct 600N print server.
HP LaserJet 8100dn C4216A The HP LaserJet 8100dn printer comes standard with 24 MB RAM, wide format printing, two 500-sheet trays, a 100-sheet multipurpose tray, an HP Jet-direct 600n print server, and a duplexer (for printing on both sides of paper).

HP LaserJet 8100 printer maintenance service error code repairs.

We will resolve LaserJet 8100 service error codes and Failures on ALL 8100 printer repairs!

">
HP 8100 Printer Error Message HP 8100 Recommended Action
ACCESS DENIED MENUS LOCKED The printer control panel function that you are trying to access has been locked to prevent unauthorized access. See your network administrator.
BAD DUPLEXER CONNECTION The duplexer is not connected properly. Reinstall the duplexer.
Print Speed Footnote The optional input tray cannot feed paper to the printer because a door or paper guide is open. Check the doors and paper guides.
Print Quality (Black, Best Quality) The engine is rolling its rollers to check for possible paper jams.
DISK DEVICE FAILURE A print job requested a printer language that does not exist in the printer. The job will not print and will be cleared from memory. Print the job using a driver for a different printer language or add the requested language to the printer (if available). Press GO to continue.
CHOSEN LANGUAGE NOT AVAILABLE The EIO disk had a critical failure and can no longer be used. Remove the EIO disk and replace it with a new one.
DISK FILE SYSTEM IS FULL The requested operation could not be performed. You might have attempted an illegal operation, such as trying to download a file to a nonexistent directory.
DISK IS WRITE PROTECTED Delete files from the EIO disk and then try again. Download or delete files from HP Jet admin and download or delete fonts from HP Font Smart.
DISK FILE OPERATION FAILED The EIO disk is protected, and no new files can be written to it. Disable the write protection through HP Jet-admin.
EIO DISK INITIALIZING The disk accessory card takes a long time to initialize. The first parameter (n) is the accessory slot number for this disk accessory card.
EIO n DISK NOT FUNCTIONAL The EIO disk is not working correctly.

EIO n INITIALIZING alternates with DO NOT POWER OFF

 

Wait for the message to disappear (approximately five minutes). If the printer EIO card is operating correctly and communicating with the network, this message disappears after approximately one minute, and no action is required.
EIO n DISK SPINNING UP The disk accessory card takes a long time to initialize. The first parameter (n) is the accessory slot number for this accessory card.
ENV FEEDER LOAD [TYPE] [SIZE] Load the requested envelope type and size into the envelope feeder. Make sure that the envelope size and type are set correctly from the Paper Handling Menu in the printer's control panel.
EXTERNAL DEVICE INITIALIZING When an external paper-handling device is connected to the printer, it must have 10 seconds to initialize after boot or after coming out of Power Save mode.
MEMORY SHORTAGE PAGE SIMPLIFIED The printer had to compress the job in order to fit it in available memory. Some data loss might have occurred.
OFFLINE Press the go key to place the printer online.
OUTPUT BIN FULL CLEAR (BIN nnn) (nnn=bin name) The output bin is full and needs to be emptied. If problem presist the output bin sensor is stuck
PERFORM PRINTER MAINTENANCE To ensure optimum print quality, the printer prompts you to perform routine maintenance every 350,000 pages.
RAM DISK FILE OPERATION FAILED The requested operation could not be performed. You might have attempted an illegal operation, such as trying to download a file to a nonexistent directory.
RAM DISK FILE SYSTEM IS FULL Delete files and then try again, or turn the printer off and then turn the printer on to delete all files on the device. (Delete files using HP Jet admin, HP Font Smart, or another software utility.
STAPLER LOW ON STAPLES The stapler device is running out of staples and needs to be refilled.
TONER LOW The print cartridge is running out of toner.
TRAY x EMPTY

Load the empty tray (x) to clear the message. If you do not load the specified tray, the printer will continue printing from the next available tray, and the message will continue to display.

13.1 PAPER JAM CHECK RIGHT DOOR

Paper feed 1. Paper late jam. Paper did not reach PS2.
13.3 PAPER JAM CHECK RIGHT DOOR alternates with THEN OPEN AND CLOSE TOP COVER Paper delay jam. Paper did not reach PS1 at the registration area.
13.5 FUSER OUTPUT, PAPER STOPPED JAM Fuser output, paper late jam. Paper never reached PS1403 at the fusing assembly
13.6 FUSER OUTPUT PAPER STOPPED JAM PS1402 did not sense the paper. Fuser output, paper stopped jam. Paper never exited the fusing assembly
13.9 CHECK LEFT DOOR Face-down bin paper late jam.
13.20 PAPER JAM CHECK ... The engine could not eject a page in the printer .The front panel message (...) will indicate the sensor closest to the paper.
13.A PAPER JAM CHECK LEFT DOOR Paper stopped at the Face-down bin.
20 INSUFFICIENT MEMORY alternates with PRESS GO TO CONTINUE The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.
21 PAGE TOO COMPLEX alternates with PRESS GO TO CONTINUE The data (dense text, rules, raster, or vector graphics) sent to the printer was too complex. Press GO to print the transferred data. (Some data might be lost.) To print the job without losing data, from the Configuration Menu in the printer control panel, set Page Protect=On, print the job, and then return Page Protect=Auto. Do not leave Page Protect=On; it might degrade performance.
22 EIO x BUFFER OVERFLOW alternates with PRESS GO TO CONTINUE Too much data was sent to the EIO card in the specified slot (x). An improper communications protocol may be in use. Press GO to clear the message. (Data will be lost.)
22 PARALLEL I/O BUFFER OVERFLOW alternates with PRESS GO TO CONTINUE Too much data was sent to the parallel port.
Check for a loose cable connection and be sure to use a high quality cable. (Some non-HP parallel cables might be missing pin connections or might otherwise not conform to the IEEE-1284 specification.)

41.3 UNEXPECTED PAPER SIZE

 

The paper size on which you are trying to print is not the same as the control panel setting for Tray 1.
Make sure that control panel setting for Tray 1 or the envelope feeder is correctly adjusted for size. (The printer will continue trying to print the job until size settings are correct.)
41.x PRINTER ERROR alternates with PRESS GO TO CONTINUE A temporary printing error occurred. Press GO. The page containing the error will automatically be reprinted.

50.x FUSER ERROR 50.1 Low Fuser temperature. 50.2 Fuser warm up service. 50.3 High Fuser temperature. 50.4 Faulty Fuser. 50.5 Inconsistent Fuser.

A fuser error has occurred. Turn the printer off for 20 minutes then turn it on if it works you're lucky if not call for service (800) 815-2737

51.x PRINTER ERROR

51.1 Beam detect error. 51.2 2 Laser error.

A temporary printing error occurred.Either there is a beam detect error or the Laser scanner error
52.0, 52.1 & 52.2 PRINTER ERROR

A temporary printing error occurred 0 Laser/scanner error. 1 Laser scanner startup error. 2 Laser scanner rotation error

53.xy.zz PRINTER ERROR There is a problem with the printer's memory. The DIMM that caused the error will not be used. Values of x, y, and zz are as follows:
x = DIMM type 0 = ROM 1 = RAM
y = Device location 0 = Internal memory (ROM or RAM) 1 to 3 = DIMM slots 1, 2, or 3
zz = Error number
You might need to replace the specified DIMM. Turn the printer off and then replace the DIMM that caused the error.
55.xx PRINTER ERROR alternates with PRESS GO TO CONTINUE A temporary printing error occurred. Press the GO. The page containing the error may automatically be reprinted.
2. Turn printer off, unplug it and reseat the formatter board.
If error returns, turn the printer off and remove all DIMMS, EIO Cards, Hard Disk Dri
57.X FAN FAILURE A fan motor failure occurred. All fans are enabled to low speed operation at power on. Fans will go into high speed operation during the print cycle. 57.2 Fan 3 - Formatter Fan (intake) 57/3 Fan 2 - Laser/scanner (exhaust) 57.5 Fan 1 -Low-voltage power supply (exhaust) 57.6 Fan 4 - Face-down delivery (exhaust) 57.9 Fan 5 - Tray 1 fan
58.x PRINTER ERROR alternates with CYCLE POWER TO CONTINUE A temporary printing error occurred.58.1 Tray 1 lifter malfunction. 58.2 Tray 2 lifter malfunction. 58.3 Tray 3 lifter malfunction. 58.4 Tray 4 lifter malfunction.
59.x PRINTER ERROR Critical Error A printer error has occurred. 59.0 Motor error. 59.1 Motor startup error. 59.2 Motor rotation error.
59.x PRINTER ERROR There is a problem with the printer's memory. 59.0 = Internal memory 59.1 internal memory error. 59.2 internal memory error. 59.3 intrnal memory error. 1 to 3 = DIMM slots 1, 2, or 3
62.x PRINTER ERROR There is a problem with the printer's memory. 62.0 = Internal memory error. 62.1 internal memory error. 62.2 internal memory error. 62.3 internal memory error.
64.x PRINTER ERROR A temporary printing error occurred. Turn the printer off and then turn the printer on.
66.xy.zz INPUT DEVICE FAILURE alternates with CHECK CABLES AND CYCLE POWER An error occurred in an external paper-handling device. Turn the printer off and then turn the printer on.

68 NVRAM ERROR CHECK SETTINGS An error occurred in the printer's nonvolatile memory (NVRAMAn error occurred in an external paper-handling device. Turn the printer off and then turn the printer on.
68 NVRAM FULL CHECK SETTINGS The printer's nonvolatile memory (NVRAM) is full. Some settings might have been reset to the factory defaults.
69.x PRINTER ERROR A temporary printing error occurred. X Description 69.0 The duplex mechanism has failed. 69.1 The duplex slide adjust has fail
79.xxxx PRINTER ERROR The printer detected an error. The numbers (xxxx) indicate the specific type of error.
Turn the printer off and then turn the printer on. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file.
8X.YYYY EIO ERROR. The EIO accessory card in slot X has encountered a critical error as specified by YYYY. 1. Move the EIO card to another slot. 2. If the error persists, replace the EIO card. 3. If the error is corrected, reseat the EIO card in the original slot

Hewlett Packard 8100 printer parts we carry for fast onsite service in Southern California!

LaserJet 8100 PART DESCRIPTION HP 8100 PART NUMBER
HP 8100 Fixing Assembly/Fuser Assembly RG5-4315/C4214-69007
HP LaserJet 8100 Maintenance Kit C3914-67902
Mulit-Purpose Pickup Assembly RG5-1880-000
Tray 1 Pickup Roller RB1-9526
Pickup Rollers Tray 2/3) RF5-2708-000CN
Feed Separation Rollers RF5-1834 / RF5-1426
Low Voltage Power Supply RG5-4357-040 RG5-4301-040CN
HP 8100 Delivery Assembly RG5-1874
laser 8100 Transfer Roller RF9-1394
8100 Laser Scanner Assembly C4214-69003/C4214-69003
8100 Formatter PCA C4107-69001/67901
8100 Paper Pick-up Assembly RG5-4334-260CN
HP 8100 Registration Roller Assembly RG5-4303-030
Vertical Transport Unit C4780-69503
Transfer Roller RG9-1361
DC Controller C4214-69009/RG5-4375
Paper Pickup Assembly C4214-69017
Main Motor RH7-5219
Control Panel Overlay C4214-40029
Tray 3 Paper Cassette RG5-3951
Tray 3 Paper Cassette R98-1004
LAserjet 8100 Diverter Door Assembly RB2-3558
HP laserjet 8100 High Voltage Power Supply RG5-4306

We provide fast on-site HP LaserJet 8100 printer model C4214A, 8100n model C4215A and 8100dn model C4216A printer repair service in Los angeles and Orange County. Our onsite LaserJet printer repair team is highly trained to provide prompt onsite HP 8100 printer service in Southern California with over 26 years of printer repair expertise!

©1991-2019 Laser Printer Services. All rights Reserved.
The Laser Printer Services Logo, this website and it's contents, are property of Laser Printer Services. All images and logos used with permission from there respective owners. No part of this site, or it's source code, may be reproduced in any way.